GPS – Suche verbessern, dank einer einfachen Datei. [root]

Man möchte “schnell” mal die genaue Adresse des Lokals haben, welches Dir empfohlen wurde. Man steht “iiirgendwo” in der Nähe, aber Genaueres weiß man nicht. Nur der Name ist bekannt und Dein Smartphone ist in Deiner Hand.

Also “schnell” mal Google Maps aufrufen und sich hin navigieren lassen? Klar!

Die App startet und dann erstmal nichts. Kein GPS Signal verfügbar. Minutenlang.

Nun gibt es einen einfachen Trick, wie man sein gerootetes Smartphone, mit einer kleinen Datei, aufpoliert. Die Datei hat nur die Adressen der AGPS Server in einem Land. AGPS ist die Technologie, die es erlaubt, seinen Aufenthalt über das WLAN herauszufinden.

Unbenannt

Man kopiert einfach die entsprechende Datei in den Ornder: \sys\etc und ändert die Rechte in rw-r-r. Schon findet das Smartphone sehr schnell seine Position, da es nicht erst durch Server im Ausland geleitet werden muss.

Klickt man auf den Link unten, kommt man auf eine Seite mit vedrschiedenen Ordnern. Auf Seite 3 ist Deutschland zu finden, aber man kann da auch andere Länder nehmen, die eben näher sind, oder in dem Du dich gerade befindest.

AGPS – Server Danke an das BlackICE Team

Happy flashing =)

Advertisements

Wie man aus einem CM11, ein CM11s macht.

Jeder, der die Überschrift versteht, ist hier willkommen und kann nach unten scrollen. Die anderen sind natürlich auch willkommen, verbleiben doch wohl bitte etwas hier.

Das beliebte Custom ROM Cyanogenmod hat neben einiger Roms für diverse Smartphones, auch noch einen Vertrag mit OnePlus. Das Resultat daraus ist der (angebliche) Flagship-Killer; “OnePlus One”. Sieht man mal von der Tatsache ab, dass dieses Invite System, was die OnePlus Manager “erfanden”, total sinnlos und unzureichend ist, hat dieses Smartphone ein angepasstes und wunderschönes CyanogenMod an Board, mit dem Namen Cyanogenmod 11s.

oneplus-one-phablet-cyanogenmod-11s-android-kitkat-os-3gb-ram-unveiled

Dieses unterscheidet sich zwar nur gering vom “normalen” Cyanogenmod, doch bietet es mehrere verbesserte Funktionen:

  • Verbesserter Lockscreen, mit wunderschönen Funktionen
  • Verbesserter DPS-Manager, der optisch viel mehr hermacht
  • Optimierte Kamera, mit einer intuitiven Bedienung
  • und viele Kleinigkeiten, die aber viel ausmachen (Screencast, CM-Gallery)

Da die meisten, leider, keinen Invite bekommen haben, gibt es nun wenigstens etwas Abhilfe. Auf der Modding-Platfort XDA-Developers, wurde ein Customisation Kit vorgestellt, welcher wenigsten dennen, die eine relativ aktuelle (Stand 14.09.14) Cyanogenmod-Version auf ihren Smartphones haben, eine Alternative.

Es wird nur noch eine Custom Recovery benötigt, um dieses Kit auf flashen zu können und schon hat man einige Verbesserungen auf seinem Smartphone, ohne ein OnePlus One zu haben.

Link zum Beitrag: Link

Link zum Direktdownload: Link

Und noch ein Video, von einem der XDA-Developer-TV Mitarbeiter:

Easy ROOT for your Lenovo Yoga Tablet (B6000 – 8″ and B8000 – 10″) with KitKat

HOWTO Root your 4.4.2 Lenovo Yoga ROM:

 

At first you have to know, whats behind all the followigng steps.Lenovo-Yoga-Tablet-1

It is not that easy to root this device with KitKat (at least at the moment).

Quote:
  1. At first you have to install an app, which uses a hack and pushs a file in /system.
  2. next you start the installed app (which is in /system now) and with this app (Kinguser) you’ll have Root rights
  3. most users dont believe in chinese root apps. So you have to install an another Rootapp, the best is SuperSU (link ist below)
  4. After you allow SuperSU the root rights, you can just uninstall the other two apps and enjoy the happiness of beeing rooted

 

Now let’s beginn:

1. Just download and install this file: Root_genious_General.apk

2. It will install a small tool, which can root your tablet. And it installs “Kinguser. It will ask you, to update your ROOT(1.0.23) to ROOT (1.1.33). It will be in chinese, just chose the right button and allow to update this tool.

3. A circle will appear with “ROOT” in it. “Push” the button and magic will happen (a progress bar) An yellow window will appear, in chinese, but you’ll see, if it was a success then you’ll see Kinguser installed on your device. (if it don’t works for the first time, just try it again)

4. After that you need to reboot your device and download and install “SuperSU” from PlayStore.

5. Install SuperSU and then Kinguser will aks you, if you will allow SuperSU root rights. Chose “Yes” and now you have the rootrights. IF IT DOESN’T you have to reboot your device several times (don’t know why, I needed several reboots and then it worked)

NOTE: I don’t really know why, but it seems, like Kinguser do not recognize, that it has root permissions at the first time. I had to turn off the permission in Kinguser options, restart and give Kinguser the root permissions again, than restart again. Just play a little arround with whis option of Kinguser. Somehow it will work than. I had to do the game twice, and it worked both times. But really don’t know why.

6. After that you need to update your binaries in SuperSU and reboot your device.

7. Then you can uninstall both chinese APPs (Kanguser can just be uninstalled with Titanium Backup) and you are rooted then

An easy guide, for restoring your stock 4.2.2 firmware on your Lenovo Yoga Tablets 8″ and 10″ (B6000 and B8000)

This is a guide for restoring the stock Lenovo Yoga Tablet 8 (B6000) and Lenovo Yoga Tablet 10 (B8000) ROMs [Android 4.2.2] (not for Lenovo Yoga Tablet 10hd+)
As seen on XDA developers forum: LINK
This guide is just a translation from russian Lenovo forum.
All credits belongs to them. All image – rights belongs to them too.
Code:
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. 
 * Please do some research before flashing it! YOU are choosing to make 
 * these modifications.
 * This should be the last option, you'll do, if your device is soft-briked
 * or the software
 * is too damaged (from rooting etc)
 */

Russian was my native language once (now I’m living in germany and my russian “skills” are little bit lower ) And my english isn’t very good too. So if yo don’t understand what i mean, just ask in PM.

Quote:
Versions: 4.2.2 Android for 8″ and 10″ Yoga Tablets (WIFI, 3G and WW_CALL)
ROM: Official Lenovo
OS: Android 4.2
Languages: Multilanguage (chinese, english, german, spanish, italian, etc
This guide works only with Windows (XP, Vista, 7, 8)

At first let’s begin with the ROM – download itself. There are different versions of those tablets, so choose wisely
I’ll post only the Android 4.2.2 versions of the rooms, if you want, you can update them by yourself with the OTA. It is because at the moment you can root the JB – version more easily. (FRAMAROOT for 4.2.2 Jelly Bean versions only!!)

You have to register on this forum for download – permissions!!

Lenovo Yoga Tablet 8″:

Lenovo Yoga Tablet 10″:

for download click on the green button on the top right side:

 
Quote:
1. Drivers

Now, whyle you are downloading the ROM, lets look at the drivers you’ll need.

At first you need Lenovo USB Driver [from this site] version 1.00.11. 9,28mb

Next step youl need some other drivers and tools:

for installing unsigned drives on Windows 8, follow the guide below:

 
  1. Get access to Startup Options: HOWTO – Method 2 is the easiest way for me
  2. Once you are there (After a restart) you have to choose number 7 (Disable driver signature enforcement)
     
    number 7
  3. When you install unsigned driver after it, windows is allways asking you this:
     
    just click yes

    – install this driver anyway

Quote:
2. Install the ROM

What do you need:

  • At least 30% of battery
  • All Driver from above and unzipped driwer for “Download mode”
  • time

Now let’s begin.

  1. Install the USB driver.
  2. Unzip The ROM and put it on your desktop.
  3. Turn off your device and unplug it from USB (if its pluged in).
  4. for Windows 7/Windows Vista/Windows XP: Install the SP Flash Tool Driver Auto Installer from above and jump to step 7.
  5. go to “Device Manager (link for short guide)
  6. now when you are in your device manager it’ll be a little bit tricky. When you NOW plug in your device (it have to be turned off), a new “unknown” device will appear. It will be there only for a few seconds, so you habe to be quick. RIGHT-Click on this unknown device and then go to “Update driver” in preferences. Then choose the driver you had downloaded and unzippt on your desktop. Thats it!
  7. Now start the FlashTool.exe, (I think which you’ll find in your unzipped ROM in the “Upgrade tool” folder. And plug in your device (micro USB)).
  8. Click on “Scatter loading” (like on the image above). Then go to your ROM (you know, on your desktop) and in folder “target_bin” choose this file: “MT6577_Android_scatter_emmc.txt” (I am nbot shure if its the same name on all ROMs, but it has to be something with “scatter” in its name.
  9. Click on “DA DL ALL WITH Cheksum” (without it, the device wont start after flashing and you have to flash all again) you’ll see it on the pictures below:
  10. The “FAC” – file will be propably not checked.
     

    Just choose it in your ROM folder by yourself in target_bin folder:

     
  11. Click on “Firmware -> Upgrade”
  12. Then you’ll see some pink lines loading. When the lines bekame yellow, you can skip the next step.
  13. It can be, that after the pink lines the Flash Tool will stop and nothing will happen then. If it keeps for one minute you have to unplug your device for 30 seconds and than just plug in again. NOTHING ELSE!!!
  14. When the green lines appears, just wait till its finished. You’ll see it, when the green circle appears:
  15. Unplug your device and restart. Don’t panik, its multilingual and your language will be there (for shure), just click on the rigt chinese words in the first window which appears and scroll up.

After that you can easiely update your tablet to 4.4.2 with the OTA

Happy flashing =)